Water filter
The installed water filter at the water inlet located before the unit must be cleaned regularly
The installed water filter at the water inlet located in front of the unit must be cleaned regularly, and especially after pipe work on the water supply system in the enterprise
If the system is operating on a partly blocked filter, the pump will be damaged. It is recommended to check the filter at least once a year and change it when needed.
When cleaning the filter - the ball valve that is installed in front of it must be closed, and the water pressure must be cut off the system by opening one of the taps. Hereafter the filter can be disassembled and cleaned.
How to clean water inlet filter
Tools needed:
13 mm socket wrench
Note! When you disassemble parts with stainless steel thread, always remember to lubricate before reassembling. Watch the video tutorial How to lubricate stainless steel thread
How to clean strainer
Tools needed:
Pipe wrench or polygrip plier